Desenvolvimento de técnicas e avaliação de materiais para conversão de exames de imagem em peças anatomofuncionais no contexto oncológico
Carregando...
Orientador
Santos, Raphael Galdino dos
Co-orientadores
Citações na Scopus
Tipo de documento
Data
2023
Título da Revista
ISSN da Revista
Título do Volume
Resumo
Este projeto tem como objetivo desenvolver um processo para a área da oncologia
envolvendo transformação de exames de imagens em peças fabricadas com manufatura aditiva
para serem utilizadas no planejamento pré e intra operatório. Durante o projeto serão testados
softwares para manipulação, tratamento, e criação de modelos tridimensionais a partir das
imagens geradas por meio dos exames de imagem, softwares para edição dos modelos
tridimensionais e softwares para utilização de máquinas de manufatura aditiva. Além dos testes,
acontecerá a seleção dos softwares para atingir o objetivo, fabricação das peças serão feitas em
máquinas de manufatura aditiva, e a validação com os stakeholders envolvidos para validar o
processo definido e a sua viabilidade. Para o desenvolvimento do processo, serão usados casos
envolvendo tumores no fígado. Pois esse órgão pode apresentar tumores em seu interior,
demandando um planejamento operatório mais complexo. Em paralelo, foram realizados testes
nas máquinas disponíveis utilizando um arquivo da segmentação de uma mama com tumor,
realizado previamente por um residente de medicina parceiro. Diante dos recursos
disponibilizados, desenvolve-se três diferentes métodos utilizando resina, para a produção de
peças anatomofuncionais. Sendo assim, os processos aplicados são adaptados para cada
método, são estes: a criação de um fígado oco de resina, colorido no interior; a formação de um
conjunto desmontável da casca do fígado, feita de resina, com as veias e tumor coloridos,
realizados separadamente; a confecção de um fígado preenchido de resina epóxi, utilizando um
molde solúvel em água, que apresenta as veias e o tumor coloridos no interior do órgão.
This project has the objective to develop a process to oncology area involving the transformation of image exams into parts manufactured in additive manufacturing machines to be used in pre and intra operative planning. During the project softwares will be tested for manipulation, treatment, and creation of three-dimensional models from images generated by image exams, softwares to edit three-dimensional models, softwares for using additive manufacturing machines. In addition to the tests, a software selection will be done to archieve the objective, tests of parts will be done from the additive manufacturing machines, and validation with the stakeholders involved to validate the defined process and its viability. For the development of process, cases involving liver tumors will be used. Because this organ can present tumors inside the organ, demanding an operative planning more complex. In parallel, tests were done on available printers using a print file of a breast with tumor segmented previously, created by a partner medicine resident. In the face of available resources, three different methods were developed using resin to produce anatomo-functional parts. Therefore, the processes applied are adapted for each method, these are: the creation of a hollow liver of resin with colorful interior; the formation of a liver from shell in a dismountable set, with colorful veins and tumor manufactured separately; and a liver filled making of epoxy resin using a water-soluble mold which exhibit colorful veins and tumor inside the organ.
This project has the objective to develop a process to oncology area involving the transformation of image exams into parts manufactured in additive manufacturing machines to be used in pre and intra operative planning. During the project softwares will be tested for manipulation, treatment, and creation of three-dimensional models from images generated by image exams, softwares to edit three-dimensional models, softwares for using additive manufacturing machines. In addition to the tests, a software selection will be done to archieve the objective, tests of parts will be done from the additive manufacturing machines, and validation with the stakeholders involved to validate the defined process and its viability. For the development of process, cases involving liver tumors will be used. Because this organ can present tumors inside the organ, demanding an operative planning more complex. In parallel, tests were done on available printers using a print file of a breast with tumor segmented previously, created by a partner medicine resident. In the face of available resources, three different methods were developed using resin to produce anatomo-functional parts. Therefore, the processes applied are adapted for each method, these are: the creation of a hollow liver of resin with colorful interior; the formation of a liver from shell in a dismountable set, with colorful veins and tumor manufactured separately; and a liver filled making of epoxy resin using a water-soluble mold which exhibit colorful veins and tumor inside the organ.
Palavras-chave
Titulo de periódico
URL da fonte
Título de Livro
URL na Scopus
Idioma
pt
URL permanente
Notas
Projeto realizado para a empresa A. C. Camargo Cancer Center - Mentores na empresa: Almir Galvão Vieira Bitencourt e Vinicius Pilão dos Santos
Membros da banca
Magalhães, Ana Carolina de
Bottene, Alex Camilli
Área do Conhecimento CNPQ
CIENCIAS SOCIAIS APLICADAS